Renesas ZSC31050FAG1-R
Sensor Interface Adv Diff Sensor Signal Conditioner
Marques: Renesas Technology Corp
Pièce Fabricant #: ZSC31050FAG1-R
Fiche de données: ZSC31050FAG1-R Datasheet (PDF)
Colis/Caisse: SSOP-16
type de produit: Integrated Circuits (ICs)
Statut RoHS:
État des stocks: 3925 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureZSC31050FAG1-R Description générale
The ZSC31050 is a CMOS integrated circuit for amplification and sensor-specific correction of bridge sensor signals. The device provides digital compensation of sensor offset, sensitivity, temperature drift and non-linearity by a 16-bit RISC microcontroller running a correction algorithm. The ZSC31050 accommodates virtually any resistive bridge sensor (e.g., piezo-resistive and steel-membrane-based pressure sensors). In addition, the device can interface to a separate temperature sensor. The bi-directional digital interfaces (I2C, SPI, ZACwire™) can be used for a simple PC-controlled calibration procedure, encompassing writing and programming a set of calibration coefficients into an on-chip EEPROM. The ZSC31050 has been designed for industrial, medical and consumer applications and is specifically suited for most pressure sensors. It can also be used with force, torque, acceleration, angle, position and revolution sensors.
Caractéristiques
- Digital compensation of sensor offset, sensitivity, temperature drift and non-linearity
- Accommodates nearly all bridge sensors via PGA and programmable ADC
- Capable of conditioning bridge sensor signals ranging from 1 to 275mV/V
- Sensor connections check and aging detection
- Temperature compensation via internal diode, external diode or bridge sensor element
- Output options: voltage (0 to 5V), current (4 to 20mA), PWM, I2C , SPI, ZACwire™ (one-wire interface), alarm
- Adjustable ADC resolution (up to 15-bit) versus sampling rate (up to 3.9kHz)
- Selectable bridge excitation: ratiometric voltage, constant voltage or constant current
- Input channel for separate temperature sensor
- Operation temperature range, depending on product version, up to -40°C to +150°C
- AEC-Q100 qualification (temperature grade 0)
- Supply voltage: +2.7V to +5.5V, with external JFET: 5 to 40 V
- Available in SSOP16 or as die
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer: | IDT (Integrated Device Technology) | Product Category: | Sensor Interface |
RoHS: | Y | Type: | Sensor Signal Conditioner |
Interface Type: | I2C, SPI | Supply Voltage - Max: | 5.5 V |
Supply Voltage - Min: | 2.7 V | Operating Supply Current: | 2.5 mA |
Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 125 C |
Mounting Style: | SMD/SMT | Package / Case: | SSOP-16 |
Packaging: | Reel | Output Current: | 4 mA, 10 mA |
Output Type: | Analog, Digital | Series: | ZSC31050 |
Brand: | IDT | Number of Channels: | 1 Channel |
Development Kit: | ZSC31050KITV3P1 | Operating Supply Voltage: | 2.7 V to 5.5 V |
Product Type: | Sensor Interface | Factory Pack Quantity: | 2000 |
Subcategory: | Interface ICs | Unit Weight: | 0.004586 oz |
Tags | ZSC31050FAG, ZSC31050FA, ZSC31050F, ZSC3105, ZSC310, ZSC31, ZSC3, ZSC |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The ZSC31050FAG1-R chip is an integrated circuit designed for high-precision digital compensation and calibration of sensors used in various applications such as pressure, temperature, and force measurement. This chip provides accurate measurement results by compensating for non-linearity, temperature-dependent effects, and other sensor-specific characteristics. It offers a simple interface to microcontrollers and operates at low power consumption for enhanced efficiency.
-
Equivalent
There isn't a direct equivalent product to the ZSC31050FAG1-R chip. However, some similar products that you may consider are the ZSC31150FAG1-R, ZSC3122EAG1-R, and ZSC3132EAG1-R chips, which are part of the same family. -
Features
The ZSC31050FAG1-R is a compact, high-performance sensor that offers digital output. It is designed to measure pressure and temperature in a variety of applications, including automotive and industrial systems. The sensor has low power consumption, high accuracy, and a fast response time, making it suitable for demanding environments. -
Pinout
The ZSC31050FAG1-R is a digital calibration amplifier designed for piezoresistive bridge sensors. It has 16 pins and operates as an analog frontend for measuring pressure, temperature, and force. Its functions include amplification, temperature compensation, and calibration. -
Manufacturer
The manufacturer of the ZSC31050FAG1-R is Renesas Electronics Corporation. Renesas Electronics is a Japanese semiconductor manufacturer that provides advanced solutions for automotive, industrial, home electronics, and other sectors. -
Application Field
The ZSC31050FAG1-R is a sensor used for measuring pressure and temperature in various applications, such as automotive systems, industrial equipment, HVAC, medical devices, and consumer electronics. It can provide accurate and reliable measurements, making it suitable for a wide range of monitoring and control applications. -
Package
The ZSC31050FAG1-R chip is available in a 20-pin SSOP package type. It has a rectangular form with a dimension of approximately 6.4mm x 6.6mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits