Microchip ATSAM4E16EA-AU
ARM® Cortex®-M4 SAM4E Microcontroller IC 32-Bit Single-Core 120MHz 1MB (1M x 8) FLASH 144-LQFP (20x20)
Marques: Microchip Technology, Inc
Pièce Fabricant #: ATSAM4E16EA-AU
Fiche de données: ATSAM4E16EA-AU Datasheet (PDF)
Colis/Caisse: LQFP-144
Statut RoHS:
État des stocks: 3960 pièces, nouveau original
type de produit: Processeurs et contrôleurs intégrés
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $4,670 | $4,670 |
10 | $4,564 | $45,640 |
30 | $4,491 | $134,730 |
100 | $4,420 | $442,000 |
In Stock:3960 PCS
ATSAM4E16EA-AU Description générale
For New Designs, we highly recommend to consider Revision B for Prototypes and Production.
ARM® Cortex®-M4 processor-based microcontroller (MCU), the SAM4E16E features a floating point unit and a high data bandwidth architecture and is targeted at industrial automation and building control applications.
The device embeds 1MB Flash and features multiple networking/connectivity peripherals, including two 2.0A/B compatible CAN interfaces and an IEEE Std 1588-compatible 10/100Mbps Ethernet MAC. Additional communication interfaces include a FS USB device, a HS SDCard/SDIO/MMC interface, USARTs, SPIs and multiple TWIs.
Analog features include dual 1Msps, 16-bit ADCs of up to 24 channels with analog front end offering offset and gain error correction, and a 2-channel, 1Msps, 12-bit DAC.
The SAM4E16E is available in 144-pin BGA and QFP package options.
Caractéristiques
- ARM Cortex-M4 with 2 Kbytes Cache running at up to 120 MHz
- Memory Protection Unit (MPU)
- DSP Instructions, Floating Point Unit (FPU), Thumb®-2 instruction set
- 1024 Kbytes Embedded Flash
- 128 Kbytes Embedded SRAM
- 16 Kbytes ROM with Embedded Boot Loader Routines (UART) and IAP Routines
- Static Memory Controller (SMC): SRAM, NOR, NAND Support
- NAND Flash Controller
- Embedded voltage regulator for single-supply operation
- Power-on-Reset (POR), Brown-out Detector (BOD) and Dual Watchdog for Safe Operation
- Quartz or ceramic resonator oscillators: 3 to 20 MHz with clock failure detection and 32.768 kHz for RTT or system clock
- RTC with Gregorian and Persian Calendar Mode, Waveform Generation in Backup mode
- RTC counter calibration circuitry compensates for 32.768 kHz crystal frequency inaccuracy
- High-precision 8/16/24 MHz factory-trimmed internal RC oscillator. In-application trimming access for frequency adjustment
- Slow clock internal RC oscillator as permanent low-power mode device clock
- One PLL up to 240 MHz for Device Clock and for USB
- Temperature Sensor
- Low-power tamper detection on two inputs, anti-tampering by immediate clear of general-purpose backup registers (GPBR)
- Up to 2 Peripheral DMA Controllers (PDC) with up to 33 Channels
- One 4-channel DMA Controller
- Sleep, Wait and Backup modes, down to 0.9 μA in Backup mode with RTC, RTT, and GPBR
- 144-ball LFBGA, 10x10 mm, pitch 0.8 mm
- 144-lead LQFP, 20x20 mm, pitch 0.5 mm
- Revision A - Industrial (-40° C to +85° C), Revision B -(-40° C to +105° C)
- Two USARTs with USART1 (ISO7816, IrDA®, RS-485, SPI, Manchester and Modem Modes)
- USB 2.0 Device: Full Speed (12 Mbits), 2668 byte FIFO, up to 8 Endpoints. On-chip Transceiver
- Two 2-wire UARTs
- Two 2-wire Interfaces (TWI)
- High-speed Multimedia Card Interface (SDIO/SD Card/MMC)
- One Master/Slave Serial Peripheral Interface (SPI) with Chip Select Signals
- Three 3-channel 32-bit Timer/Counter blocks with Capture, Waveform, Compare and PWM Mode. Quadrature Decoder Logic and 2-bit Gray Up/Down Counter for Stepper Motor.
- 32-bit low-power Real-time Timer (RTT) and low-power Real-time Clock (RTC) with calendar and alarm features
- 256-bit General Purpose Backup Registers (GPBR)
- One Ethernet MAC (GMAC) 10/100 Mbps in MII mode only with dedicated DMA and Support for IEEE1588, Wake-on-LAN
- Two CAN Controllers with eight Mailboxes
- 4-channel 16-bit PWM with Complementary Output, Fault Input, 12-bit Dead Time Generator Counter for Motor Control.
- Real-time Event Management
- Up to 117 I/O Lines with External Interrupt Capability (Edge or Level Sensitivity), Debouncing, Glitch Filtering
- Bidirectional Pad, Analog I/O, Programmable Pull-up/Pull-down
- Five 32-bit Parallel Input/Output Controllers, Peripheral DMA Assisted Parallel Capture Mode
- AES 256-bit Key Algorithm compliant with FIPS Publication 197
- AFE (Analog Front End): 2x16-bit ADC, up to 24-channels, Differential Input Mode, Programmable Gain Stage, Auto Calibration and Automatic Offset Correction
- One 2-channel 12-bit 1 Msps DAC
- One Analog Comparator with Flexible Input Selection, Selectable Input Hysteresis
- Serial Wire/JTAG Debug Port(SWJ-DP)
- Debug access to all memories and registers in the system, including Cortex-M4 register bank when the core is running, halted, or held in reset.
- Serial Wire Debug Port (SW-DP) and Serial Wire JTAG Debug Port (SWJ-DP) debug access.
- Flash Patch and Breakpoint (FPB) unit for implementing breakpoints and code patches.
- Data Watchpoint and Trace (DWT) unit for implementing watchpoints, data tracing, and system profiling.
- Instrumentation Trace Macrocell (ITM) for support of printf style debugging.
- IEEE1149.1 JTAG Boundary-scan on all digital pins.
- ASF-Atmel software Framework – SAM software development framework
- Integrated in the Atmel Studio IDE with a graphical user interface or available as standalone for GCC, IAR compilers.
- DMA support, Interrupt handlers Driver support
- USB, TCP/IP, Wi-Fi and Bluetooth, Numerous USB classes, DHCP and Wi-Fi encryption Stacks
- RTOS integration, FreeRTOS is a core component
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Source Content uid | ATSAM4E16EA-AU | Pbfree Code | Yes |
Rohs Code | Yes | Part Life Cycle Code | Active |
Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | Package Description | LQFP-144 |
Reach Compliance Code | compliant | ECCN Code | 5A992.C |
HTS Code | 8542.31.00.01 | Samacsys Manufacturer | Microchip |
Has ADC | YES | Address Bus Width | 24 |
Bit Size | 32 | Boundary Scan | YES |
CPU Family | CORTEX-M4F | Clock Frequency-Max | 20 MHz |
DAC Channels | YES | DMA Channels | YES |
External Data Bus Width | 8 | Format | FLOATING POINT |
Integrated Cache | YES | JESD-30 Code | S-PQFP-G144 |
JESD-609 Code | e3 | Length | 20 mm |
Low Power Mode | YES | Number of DMA Channels | 33 |
Number of I/O Lines | 117 | Number of Serial I/Os | 2 |
Number of Terminals | 144 | Number of Timers | 3 |
On Chip Data RAM Width | 8 | On Chip Program ROM Width | 8 |
Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
PWM Channels | YES | Package Body Material | PLASTIC/EPOXY |
Package Code | LFQFP | Package Equivalence Code | QFP144,.87SQ,20 |
Package Shape | SQUARE | Package Style | FLATPACK, LOW PROFILE, FINE PITCH |
Qualification Status | Not Qualified | RAM (bytes) | 131072 |
RAM (words) | 32768 | ROM (words) | 1048576 |
ROM Programmability | FLASH | Seated Height-Max | 1.6 mm |
Speed | 120 MHz | Supply Voltage-Max | 1.32 V |
Supply Voltage-Min | 1.08 V | Supply Voltage-Nom | 1.2 V |
Surface Mount | YES | Technology | CMOS |
Temperature Grade | INDUSTRIAL | Terminal Finish | Matte Tin (Sn) - annealed |
Terminal Form | GULL WING | Terminal Pitch | 0.5 mm |
Terminal Position | QUAD | Width | 20 mm |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC | Pin Count | 144 |
Package Category | Quad Flat Packages | Released Date | Sep 28, 2015 |
Last Modified Date | Mar 7, 2023 4:10 PM UTC |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The ATSAM4E16EA-AU is a high-performance microcontroller chip designed by Atmel for industrial applications. It features a 120 MHz ARM Cortex-M4 processor, advanced peripherals, and a wide range of connectivity options. This chip is ideal for applications requiring high processing power and extensive connectivity capabilities.
-
Equivalent
Some equivalent products of ATSAM4E16EA-AU chip are ATSAM4E8EA-AU, ATSAM4DC32C-AN, and ATSAM4DC32A-AN. These chips offer similar features and capabilities, making them suitable alternatives for designing embedded systems with similar requirements. -
Features
1. 32-bit Cortex-M4 microcontroller 2. Operating frequency up to 120 MHz 3. 1 MB of flash memory and 128 KB of SRAM 4. Advanced peripherals including USB, CAN, Ethernet, and multiple UART, SPI, and I2C interfaces 5. Low power consumption with sleep modes and power-down features -
Pinout
The ATSAM4E16EA-AU is a 144-pin microcontroller with functions including 16-bit external bus interface, USB, CAN, LCD controller, and up to 1MB of flash memory. It is part of the SAM4E series by Microchip, suitable for industrial and consumer applications. -
Manufacturer
The ATSAM4E16EA-AU is manufactured by Microchip Technology Inc., a company specializing in semiconductor and microcontroller technology. They provide products and solutions for various industries, including automotive, communication, and consumer markets. -
Application Field
The ATSAM4E16EA-AU microcontroller is commonly used in applications such as industrial control systems, home automation, smart energy management, and automotive electronics. It is suitable for environments that require high-performance processing capabilities, low power consumption, and advanced connectivity features. -
Package
The ATSAM4E16EA-AU chip is a QFP package type, with a 100-pin form factor. The size of the chip is 14 mm x 14 mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
The team at Ovaga is knowledgeable and always willing to help!