LSF0204PWR
Voltage translator for bidirectional communication with open-drain and push-pull outputs
Marques: Texas Instruments
Pièce Fabricant #: LSF0204PWR
Fiche de données: LSF0204PWR Fiche de données (PDF)
Colis/Caisse: TSSOP (PW)-14
Statut RoHS:
État des stocks: 6807 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureLSF0204PWR Description générale
The LSF0204PWR is a bidirectional voltage level translator belonging to the LSF family. It facilitates voltage translation between different voltage levels without the need for a direction terminal. The device operates within a wide voltage range, supporting translations between 0.8 V and 5.0 V. It features a low standby current and high-impedance I/O terminals when the enable (EN) pin is low, allowing for efficient power management. The device exhibits low Ron, minimizing signal distortion and propagation delay. It can be used in various applications such as GPIO, MDIO, PMBus, SMBus, SDIO, UART, and I2C interfaces in telecom infrastructure, industrial, automotive, and personal computing sectors. The package options available for LSF0204PWR include TSSOP (14), UQFN (12), VQFN (14), and DSBGA (12), each with specific body sizes as specified in the datasheet. For further details and specifications, refer to the relevant sections of the datasheet provided.
Caractéristiques
- Provides bidirectional voltage translation with no direction terminal
- Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30-pF capacitor load and up to 40-MHz up/down translation at 50-pF capacitor load
- Supports Ioff, partial power-down mode (refer to Feature Description)
- Allows bidirectional voltage level translation between
- 0.8 V ↔ 1.8, 2.5, 3.3, 5 V
- 1.2 V ↔ 1.8, 2.5, 3.3, 5 V
- 1.8 V ↔ 2.5, 3.3, 5 V
- 2.5 V ↔ 3.3, 5 V
- 3.3 V ↔ 5 V
- Low standby current
- 5 V Tolerance I/O port to support TTL
- Low Ron provides less signal distortion
- High-impedance I/O terminals for EN = Low
- Flow-through pinout for easy PCB trace routing
- Latch-up performance exceeds 100 mA per JESD17
- –40°C to 125°C operating temperature range
- ESD performance tested per JESD 22
- 2000-V human-body model (A114-B, Class II)
- 200-V machine model (A115-A)
- 1000-V charged-device model (C101)
Application
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Technology family | LSF | Applications | I2C, SMBus |
Bits (#) | 4 | Data rate (max) (MBps) | 200 |
High input voltage (min) (V) | 0.95 | High input voltage (max) (V) | 5 |
Vout (min) (V) | 0.95 | Vout (max) (V) | 5 |
IOH (max) (mA) | 0 | IOL (max) (mA) | 0 |
Supply current (max) (µA) | 12.5 | Features | Output enable |
Input type | Transmission Gate | Output type | 3-State, Transmission Gate |
Rating | Catalog |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits