ST STM32F102C8T6
ARM Microcontrollers - MCU 32BIT Cortex M3 L/D USB MCU
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F102C8T6
Fiche de données: STM32F102C8T6 Datasheet (PDF)
Colis/Caisse: LQFP-48
Statut RoHS:
État des stocks: 3506 pièces, nouveau original
type de produit: CI logiques programmables
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $5,771 | $5,771 |
10 | $5,047 | $50,470 |
30 | $4,604 | $138,120 |
100 | $4,235 | $423,500 |
In Stock:3506 PCS
STM32F102C8T6 Description générale
The STM32F102xx medium-density USB access line incorporates the high-performance Arm®Cortex®-M3 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (Flash memory of 64 or 128 Kbytes and SRAM of 10 or 16 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (two I2Cs, two SPIs, one USB and three USARTs), one 12-bit ADC and three general-purpose 16-bit timers.The STM32F102xx family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F102xx medium-density USB access line is delivered in the LQFP48 7 × 7 mm and LQFP64 10 × 10 mm packages.The STM32F102xx medium-density USB access line microcontrollers are suitable for a wide range of applications.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.
Caractéristiques
- Core: Arm® 32-bit Cortex®-M3CPU
- 48 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 WS memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 or 128 Kbytes of Flash memory
- 10 or 16 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- Debug mode
- Serial wire debug (SWD) and JTAG interfaces
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- Up to 51 fast I/O ports
- 37/51 I/Os all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to six timers
- Three 16-bit timers, each with up to four IC/OC/PWM or pulse counter
- Two watchdog timers (Independent and Window)
- SysTick timer: 24-bit downcounter
- Up to eight communication interfaces
- Up to two I2C interfaces (SMBus/PMBus)
- Up to three USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- Up to two SPIs (12 Mbit/s)
- One USB 2.0 full speed interface
- CRC calculation unit, 96-bit unique ID
- ECOPACK packages
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F102C8 |
Mounting Style: | SMD/SMT | Package / Case: | LQFP-48 |
Core: | ARM Cortex M3 | Program Memory Size: | 64 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 48 MHz | Number of I/Os: | 37 I/O |
Data RAM Size: | 10 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
Brand: | STMicroelectronics | Data RAM Type: | SRAM |
Height: | 1.4 mm | Interface Type: | I2C, SPI, USART, USB |
Length: | 7 mm | Moisture Sensitive: | Yes |
Number of ADC Channels: | 10 Channel | Number of Timers/Counters: | 3 Timer |
Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 1500 |
Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
Width: | 7 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F102C8T6 is a microcontroller based on the ARM Cortex-M3 core. It features 64 KB of Flash memory, 8 KB of RAM, and various peripherals like GPIO, timers, UART, SPI, I2C, ADC, and more. It is commonly used in applications requiring low power consumption and real-time control.
-
Equivalent
Some equivalent products of the STM32F102C8T6 chip include STM32F103C8T6, STM32F105C8T6, and STM32F107C8T6. These chips are part of the same STM32F1 series microcontrollers from STMicroelectronics, offering similar features and functionality. -
Features
The STM32F102C8T6 is a microcontroller from STMicroelectronics. It features a 32-bit ARM Cortex-M3 core operating at up to 72 MHz, 64KB flash memory, 8KB RAM, and various peripherals such as UART, SPI, I2C, ADC, and timers. It is suitable for a wide range of applications requiring real-time processing and connectivity. -
Pinout
The STM32F102C8T6 is a microcontroller with a LQFP64 package. It has 64 pins. The function of each pin can vary, depending on the specific configuration and usage of the microcontroller. The pinout and functions can be found in the datasheet provided by the manufacturer. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F102C8T6. It is a multinational semiconductor company that designs, develops, and manufactures a range of electronic components, including microcontrollers like the STM32 series. It provides integrated circuits and solutions for various industries, such as automotive, industrial, consumer electronics, and telecommunications. -
Application Field
The STM32F102C8T6 is widely used in various application areas, including industrial automation, consumer electronics, and medical devices. It is commonly found in products such as motor control systems, set-top boxes, fitness trackers, and blood glucose meters. Its versatility, low power consumption, and rich peripheral options make it suitable for a wide range of applications. -
Package
The STM32F102C8T6 chip comes in a LQFP (Low-Profile Quad Flat Package) package type. It has a form factor of 48 pins and a size of 7 mm x 7 mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Components arrived in good condition, but shipping time was longer than expected.