ST STM32F103RCT7
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit Single-Core 72MHz 256KB (256K x 8) FLASH 64-LQFP (10x10)
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F103RCT7
Fiche de données: STM32F103RCT7 Datasheet (PDF)
Colis/Caisse: LQFP-64
type de produit: ARM Microcontrollers - MCU
Statut RoHS:
État des stocks: 2846 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F103RCT7 Description générale
The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.Evaluation board with STM32F103Zx MCU.STM32 Nucleo-64 development board with STM32F103.ST-LINK/V2 in-circuit debugger/programmer for ST.
Caractéristiques
- Core: ARM® 32-bit Cortex®-M3 CPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 64 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 11 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F103RC |
Mounting Style: | SMD/SMT | Package / Case: | LQFP-64 |
Core: | ARM Cortex M3 | Program Memory Size: | 256 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 72 MHz | Number of I/Os: | 51 I/O |
Data RAM Size: | 48 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 105 C | Packaging: | Tray |
Brand: | STMicroelectronics | Data RAM Type: | SRAM |
Height: | 1.4 mm | Interface Type: | CAN, I2C, SPI, USART |
Length: | 10 mm | Moisture Sensitive: | Yes |
Number of ADC Channels: | 16 Channel | Number of Timers/Counters: | 11 Timer |
Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 960 |
Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
Width: | 10 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F103RCT7 chip is a microcontroller from STMicroelectronics that belongs to the STM32F1 series. It features an ARM Cortex-M3 core running at a maximum speed of 72 MHz, along with a variety of peripherals and memory options. It is widely used in industrial applications, consumer electronics, and other embedded systems that require reliable and efficient processing capabilities.
-
Equivalent
Some equivalents of the STM32F103RCT7 chip include the STM32F103C8T6, STM32F103CBT6, and STM32F103RBT6. These chips are similar in features and functionalities, but may differ in terms of package type, memory capacity, and pin count. -
Features
The STM32F103RCT7 microcontroller is based on the ARM Cortex-M3 core, runs at 72MHz, has 256KB flash memory, 48KB RAM, and is equipped with various communication interfaces such as SPI, I2C, USART, and USB. It also features a 12-bit ADC, timers, and GPIO pins, making it suitable for a wide range of applications. -
Pinout
The STM32F103RCT7 is a microcontroller with a 64-pin count. It is part of the STM32F1 series and features ARM Cortex-M3 core. The pins provide various functions such as GPIO, UART, SPI, I2C, ADC, DAC, timers, interrupts, and more. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F103RCT7. It is a multinational semiconductor and electronics company based in Geneva, Switzerland. STMicroelectronics is known for its wide range of products, including microcontrollers, sensors, power management, and communication devices. -
Application Field
The STM32F103RCT7 microcontroller can be used in various application areas, including industrial automation, motor control, power management, home appliances, and consumer electronics. It offers excellent performance, high-speed connectivity, and rich peripheral support, making it a versatile choice for a wide range of embedded systems. -
Package
The STM32F103RCT7 chip is available in a LQFP64 package type, has a form factor of Quad Flat Package, and has a size of 10mm x 10mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Ovaga always has the components I need in stock and they always work perfectly for my projects.