ST STM32F103VCH6
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit Single-Core 72MHz 256KB (256K x 8) FLASH 100-LFBGA (10x10)
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F103VCH6
Fiche de données: STM32F103VCH6 Datasheet (PDF)
Colis/Caisse: LFBGA100
Statut RoHS:
État des stocks: 3307 pièces, nouveau original
type de produit: Processeurs et contrôleurs intégrés
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $8,561 | $8,561 |
200 | $3,314 | $662,800 |
500 | $3,198 | $1599,000 |
1000 | $3,140 | $3140,000 |
In Stock:3307 PCS
STM32F103VCH6 Description générale
The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.Evaluation board with STM32F103Zx MCU.STM32 Nucleo-64 development board with STM32F103.ST-LINK/V2 in-circuit debugger/programmer for ST.
Caractéristiques
- Core: ARM® 32-bit Cortex®-M3 CPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 64 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 11 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
feature-data-bus-width-bit | 32 | feature-minimum-operating-supply-voltage-v | 2 |
feature-maximum-operating-supply-voltage-v | 3.6 | feature-interface-type | CAN/I2C/SPI/USART/USB |
feature-tradename | feature-packaging | Tray | |
feature-rad-hard | feature-pin-count | 100 | |
feature-supplier-package | LFBGA | feature-standard-package-name1 | BGA |
feature-cecc-qualified | No | feature-esd-protection | Yes |
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | 3A991a.2. |
feature-svhc | No |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F103VCH6 is a microcontroller chip manufactured by STMicroelectronics. It is part of the STM32F1 series and is based on the ARM Cortex-M3 core. This chip offers a wide range of features, including high-performance processing, a variety of connectivity options, and a rich set of peripherals. It is commonly used in applications such as industrial control systems, consumer electronics, and automotive systems.
-
Equivalent
Some equivalent products of the STM32F103VCH6 chip include STM32F103VET6, STM32F103RCT6, and STM32F103C8T6. These chips are part of the STM32F1 series and share similar features and capabilities. -
Features
The STM32F103VCH6 microcontroller features a 32-bit ARM Cortex-M3 core running at a maximum frequency of 72 MHz. It has 256 KB of Flash memory, 48 KB of RAM, and offers a rich set of peripherals including GPIO, USART, SPI, I2C, and ADC. It also supports both 5V and 3.3V supply voltage. -
Pinout
The STM32F103VCH6 microcontroller has 100 pins. It is part of the STM32F1 series and features an ARM Cortex-M3 core. It offers various functions such as GPIO, timers, UART, SPI, I2C, ADC, DAC, and more. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F103VCH6. It is a multinational semiconductor and electronics company. -
Application Field
The STM32F103VCH6 microcontroller is commonly used in various application areas including industrial control systems, consumer electronics, healthcare devices, and automation equipment. It provides a wide range of features such as a 32-bit ARM Cortex-M3 core, multiple communication interfaces, and a large memory capacity, making it suitable for a diverse range of applications. -
Package
The STM32F103VCH6 chip is available in a LQFP (Low Profile Quad Flat Package) package type. It comes in a compact form with a body size of 10mm x 10mm and a pin count of 100.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Ovaga always delivers the best electronic components and service.