TI THS4551IDGKR
Differential Amplifiers Low Noise, Precision, 150MHz, Fully Differential Amplifier 8-VSSOP -40 to 125
Marques: TI
Pièce Fabricant #: THS4551IDGKR
Fiche de données: THS4551IDGKR Fiche de données (PDF)
Colis/Caisse: VSSOP-8
Statut RoHS:
État des stocks: 10000 pièces, nouveau original
type de produit: Amplifiers - Op Amps, Buffer, Instrumentation
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $2,746 | $2,746 |
10 | $2,387 | $23,870 |
30 | $2,174 | $65,220 |
100 | $1,957 | $195,700 |
500 | $1,856 | $928,000 |
1000 | $1,811 | $1811,000 |
In Stock:10000 PCS
THS4551IDGKR Description générale
The THS4551 fully differential amplifier offers an easy interface from single-ended sources to the differential output required by high-precision analog-to-digital converters (ADCs). Designed for exceptional dc accuracy, low noise, and robust capacitive load driving, this device is well suited for data acquisition systems where high precision is required along with the best signal-to-noise ratio (SNR) and spurious-free dynamic range (SFDR) through the amplifier and ADC combination.
The THS4551 features the negative rail input required when interfacing a dc-coupled, ground-centered, source signal to a single-supply differential input ADC. Very low dc error and drift terms support the emerging 16- to 20-bit successive-approximation register (SAR) input requirements. A wide-range output common-mode control supports the ADC running from 1.8-V to 5-V supplies with ADC common-mode input requirements from 0.7 V to greater than 3.0 V.
The THS4551 device is characterized for operation over the wide temperature range of –40°C to +125°C, and is available in 8-pin VSSOP, 16-pin VQFN, and 10-pin WQFN packages.
Caractéristiques
- Bandwidth: 150 MHz (G = 1 V/V)
- Differential Output Slew Rate: 220 V/µs
- Gain Bandwidth Product: 135 MHz
- Negative Rail Input (NRI), Rail-to-Rail Output (RRO)
- Wide Output Common-Mode Control Range
- Single-Supply Operating Range: 2.7 V to 5.4 V
- Trimmed-Supply Current: 1.37 mA at 5 V
- 25°C Input Offset: ±175 µV (max)
- Input Offset Voltage Drift: ±1.8 µV/°C (max)
- Differential Input Voltage Noise: 3.3 nV/√ Hz
- HD2: –128 dBc at 2 VPP, 100 kHz
- HD3: –139 dBc at 2 VPP, 100 kHz
- < 50-ns Settling Time: 4-V Step to 0.01%
- 18-Bit Settling Time: 4-V Step, < 500 ns
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Number of channels | 1 | Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 2.7 |
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 5.4 | BW at Acl (MHz) | 150 |
Acl, min spec gain (V/V) | 1 | Slew rate (typ) (V/µs) | 220 |
Architecture | Bipolar, Fully Differential ADC Driver | Vn at flatband (typ) (nV√Hz) | 3.3 |
Iq per channel (typ) (mA) | 1.35 | Rail-to-rail | In to V-, Out |
Vos (offset voltage at 25°C) (max) (mV) | 0.175 | Operating temperature range (°C) | -40 to 125 |
Iout (typ) (mA) | 45 | 2nd harmonic (dBc) | 128 |
3rd harmonic (dBc) | 139 | Frequency of harmonic distortion measurement (MHz) | 0.1 |
GBW (typ) (MHz) | 135 | Input bias current (max) (pA) | 1500000 |
Features | Shutdown | CMRR (typ) (dB) | 110 |
Rating | Catalog |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The THS4551IDGKR is a high-speed differential amplifier chip designed for applications that require wide bandwidth and low distortion, such as video transmission and data communication. It features low input voltage noise, high slew rate, and a wide supply voltage range, making it an ideal choice for high-performance signal processing systems.
-
Equivalent
The equivalent products of THS4551IDGKR chip are THS4551, LMH6554 and OPA658. -
Features
1. High-speed current feedback amplifier. 2. Bandwidth of 620 MHz. 3. Slew rate of 1900 V/µs. 4. Low distortion of -75 dBc. 5. Rail-to-rail output swing. 6. Low input offset voltage of 2 mV. 7. Operates from ±2 V to ±6 V power supplies. 8. Available in a VSSOP-8 package. -
Pinout
The THS4551IDGKR is a differential amplifier with a pin count of 8. Pin 1 is the output, pins 2 and 3 are the non-inverting and inverting inputs, pin 4 is VCC+, pin 5 is GND, pin 6 is VCC-, and pins 7 and 8 are the disable input. -
Manufacturer
The THS4551IDGKR is manufactured by Texas Instruments, an American semiconductor company specializing in the design and production of analog and digital semiconductor products. Texas Instruments is a leading manufacturer of a wide range of integrated circuits and semiconductor solutions for various applications including industrial, automotive, and consumer electronics. -
Application Field
The THS4551IDGKR is commonly used in high-speed data acquisition systems, medical imaging equipment, and radar systems. It is also used in communication systems, video processing applications, and industrial control systems where high-speed signal amplification and precision are required. -
Package
The THS4551IDGKR chip is a surface-mount integrated circuit (IC) available in a MSOP-8 package. It has a small form factor and dimensions of 3mm x 4.9mm x 1.1mm. The package size of the THS4551IDGKR chip is typically 8 pins.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits