Commandes de plus de
$5000TI TL16C752DPFBR
Suitable for use in a variety of applications requiring serial communication
Marques: Ti
Pièce Fabricant #: TL16C752DPFBR
Fiche de données: TL16C752DPFBR Fiche de données (PDF)
Colis/Caisse: TQFP-48
Statut RoHS:
État des stocks: 1 835 pièces, nouveau original
type de produit: UARTs
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $5,757 | $5,757 |
10 | $5,074 | $50,740 |
30 | $4,658 | $139,740 |
100 | $4,308 | $430,800 |
En stock: 1 835 PC
TL16C752DPFBR Description générale
The TL16C752D is a dual universal asynchronous receiver transmitter (UART) with 64-byte FIFOs, automatic hardware and software flow control, and data rates up to 3 Mbps. The device offers enhanced features. It has a transmission character control register (TCR) that stores received FIFO threshold level to start or stop transmission during hardware and software flow control.
With the FIFO RDY register, the software gets the status of TXRDY or RXRDY for all two ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loop-back capability allows onboard diagnostics. The TL16C752D incorporates the functionality of two UARTs, each UART having its own register set and FIFOs.
The two UARTs share only the data bus interface and clock source, otherwise they operate independently. Another name for the UART function is asynchronous communications element (ACE), and these terms are used interchangeably. The bulk of this document describes the behavior of each ACE, with the understanding that two such devices are incorporated into the TL16C752D device.
Caractéristiques
- Pin Configuration for Enhanced Performance
- FIFO Register Management and Error Detection
- Data Transfer Rate Optimization and Control
- Serial Interface Characteristic Customization
- Data Integrity Verification and Rejection
- Transmission and Reception Protocol Compliance
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Number of channels | 2 | FIFO (Byte) | 64 |
Rx FIFO trigger levels (#) | 16 | Tx FIFO trigger levels (#) | 16 |
Programmable FIFO trigger levels | Yes | CPU interface | X86 |
Baud rate at Vcc = 2.5 V & with 16x sampling (max) (MBps) | 1.5 | Baud rate at Vcc = 1.8 V & with 16x sampling (max) (MBps) | 1 |
Baud rate at Vcc = 3.3 V & with 16x sampling (max) (MBps) | 2 | Baud rate at Vcc = 5 V & with 16x sampling (max) (MBps) | 3 |
Operating voltage (V) | 1.62 to 5.5 | Auto RTS/CTS | Yes |
Rating | Catalog |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The TL16C752DPFBR is a dual UART (Universal Asynchronous Receiver/Transmitter) controller chip that provides two full-duplex asynchronous communication channels. It features high-speed data rates, 16-byte FIFO buffers, programmable baud rate generator, and advanced features like auto flow control and fractional baud rate generation. Ideal for applications requiring multiple serial communication channels.
-
Equivalent
Some equivalent products of TL16C752DPFBR are XR16L782, MAX3110E, and ST16C752. These chips are also dual UART with 64-byte FIFOs and compatible with various serial communication protocols. They offer similar functionality and features to the TL16C752DPFBR chip. -
Features
The TL16C752DPFBR is a dual-channel universal asynchronous receiver/transmitter (UART) with 16-byte FIFOs. It features data rates up to 3 Mbps, software-selectable modes, internal loopback mode, and support for 5V and 3.3V systems. It also includes power management modes, auto flow control, and 64-byte transmit/receive buffers. -
Pinout
The TL16C752DPFBR is a Dual UART with 64 Byte FIFOs and IrDA SIR. It has a pin count of 48 and functions as a dual-channel UART with 64-byte FIFOs, supporting IrDA SIR communication. -
Manufacturer
Texas Instruments is the manufacturer of the TL16C752DPFBR. It is an American technology company that designs and manufactures semiconductors and various integrated circuits for a wide range of applications in industries such as automotive, industrial, communications, and robotics. -
Application Field
The TL16C752DPFBR is commonly used in various applications such as communication systems, industrial automation, and embedded control systems. It is also suitable for use in data acquisition systems, networking equipment, and other electronics that require multiple serial ports for efficient and reliable data communication. -
Package
The TL16C752DPFBR chip is available in a TQFP package type, with a form factor of surface mount. It comes in a size of 48 pins.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits