Ce site web utilise des cookies. En utilisant ce site, vous consentez à l'utilisation de cookies. Pour plus d'informations, veuillez consulter notre politique de confidentialité.

TI UCC27524ADR 48HRS

Low-Side Gate Driver IC Non-Inverting 8-SOIC

ISO14001 ISO9001 DUNS

Marques: TI

Pièce Fabricant #: UCC27524ADR

Fiche de données: UCC27524ADR Fiche de données (PDF)

Colis/Caisse: SOP-8

Statut RoHS:

État des stocks: 2500 pièces, nouveau original

type de produit: Gate Drivers

Warranty: 1 Year Ovaga Warranty - Find Out More

Tarifs

*Tous les prix sont en USD

Qté Prix unitaire Prix ext
1 $0,443 $0,443
10 $0,354 $3,540
30 $0,316 $9,480
100 $0,270 $27,000
500 $0,259 $129,500
1000 $0,246 $246,000

In Stock:2500 PCS

- +

Citation courte

Veuillez soumettre une demande de prix pour UCC27524ADR ou envoyez-nous un email: E-mail: [email protected], nous vous contacterons dans les 12 heures.

UCC27524ADR Description générale

The UCC27524A device is a dual-channel, high-speed, low-side, gate-driver device capable of effectively driving MOSFET and IGBT power switches. The UCC27524A is a variant of the UCC2752x family. The UCC27524A adds the ability to handle –5 V directly at the input pins for increased robustness. The UCC27524A is a dual non-inverting driver. Using a design that inherently minimizes shoot-through current, the UCC27524A is capable of delivering high-peak current pulses of up to 5-A source and 5-A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay typically 13 ns. In addition, the drivers feature matched internal propagation delays between the two channels which are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with a single input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.

For safety purpose, internal pull-up and pull-down resistors on the input pins of the UCC27524A ensure that outputs are held LOW when input pins are in floating condition. UCC27524A features Enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.

UCC27524A family of devices are available in SOIC-8 (D), VSSOP-8 with exposed pad (DGN) packages.

UCC27524ADR

Caractéristiques

  • Industry-Standard Pin Out
  • Two Independent Gate-Drive Channels
  • 5-A Peak Source and Sink-Drive Current
  • Independent-Enable Function for Each Output
  • TTL and CMOS Compatible Logic Threshold
    Independent of Supply Voltage
  • Hysteretic-Logic Thresholds for High Noise
    Immunity
  • Ability to Handle Negative Voltages (–5 V)
    at Inputs
  • Inputs and Enable Pin-Voltage Levels Not
    Restricted by VDD Pin Bias Supply Voltage
  • 4.5 to 18-V Single-Supply Range
  • Outputs Held Low During VDD-UVLO (Ensures
    Glitch-Free Operation at Power Up and Power Down)
  • Fast Propagation Delays (13-ns Typical)
  • Fast Rise and Fall Times (7-ns and 6-ns Typical)
  • 1-ns Typical Delay Matching Between 2-Channels
  • Two Outputs are Paralleled for Higher Drive
    Current
  • Outputs Held in Low When Inputs Floating
  • SOIC-8, HVSSOP-8 PowerPAD Package Options
  • Operating Temperature Range of –40 to 140°C
UCC27524ADR

Caractéristiques

Paramètre Valeur Paramètre Valeur
Number of channels 2 Power switch GaNFET, IGBT, MOSFET
Peak output current (A) 5 Input VCC (min) (V) 4.5
Input VCC (max) (V) 18 Features Enable pin
Operating temperature range (°C) -40 to 140 Rise time (ns) 7
Fall time (ns) 6 Propagation delay time (µs) 0.013
Input threshold CMOS, TTL Channel input logic Dual, Non-Inverting
Input negative voltage (V) -5 Rating Catalog
Undervoltage lockout (typ) (V) 4

Expédition

Type d'expédition Frais d'expédition Délai de mise en œuvre
DHL DHL $20.00-$40.00 (0.50 KG) 2-5 jours
Fedex FedEx $20.00-$40.00 (0.50 KG) 2-5 jours
UPS UPS $20.00-$40.00 (0.50 KG) 2-5 jours
TNT TNT $20.00-$40.00 (0.50 KG) 2-5 jours
EMS EMS $20.00-$40.00 (0.50 KG) 2-5 jours
LA POSTE AÉRIENNE ENREGISTRÉE LA POSTE AÉRIENNE ENREGISTRÉE $20.00-$40.00 (0.50 KG) 2-5 jours

Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.

Paiement

Modalités de paiement Frais de main
Virement bancaire Virement bancaire facturer des frais bancaires de 30,00 $ US.
Pay Pal Pay Pal facturer des frais de service de 4,0 %.
Carte de crédit Carte de crédit facturez des frais de service de 3,5%.
Western union Western union charge US.00 banking fee.
Paiement de Petit Montant Paiement de Petit Montant facturer des frais bancaires de 0,00 $ US.

Garanties

1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.

2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.

Emballage

  • Produit

    Étape1 :Produit

  • Emballage sous vide

    Étape2 :Emballage sous vide

  • Sac antistatique

    Étape3 :Sac antistatique

  • Emballage individuel

    Étape4 :Emballage individuel

  • Boîtes d'emballage

    Étape5 :Boîtes d'emballage

  • étiquette d'expédition à code-barres

    Étape6 :étiquette d'expédition à code-barres

Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.

L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.

Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.

Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.

  • ESD
  • ESD

Points de pièce

  • The UCC27524ADR is a chip that belongs to the UCCx75xx series of low-side gate drivers from Texas Instruments. It is designed to drive MOSFETs and IGBTs in applications such as motor control, power supplies, and inverters. The chip offers fast rise and fall times, high peak output current, and protection features like undervoltage lockout and thermal shutdown. It operates on a wide supply voltage range and provides reliable performance for various power electronics applications.
  • Equivalent

    The equivalent products of the UCC27524ADR chip are the UCC27524 and UCC27525.
  • Features

    The UCC27524ADR is a dual-channel, high-speed gate driver with independent outputs. It has a 2.5A peak source and 5A peak sink current capability, a wide voltage range, and an adjustable dead time. It is suitable for driving MOSFETs, IGBTs, and GaN power switches in various applications such as power supplies, motor drives, and industrial automation.
  • Pinout

    The UCC27524ADR is a 8-pin integrated circuit (IC). It is a dual-channel high-speed low-side gate driver used for driving power MOSFETs and IGBTs. It provides level shifting capabilities and has an enable and disable feature for each channel, making it suitable for various power electronics applications.
  • Manufacturer

    The manufacturer of the UCC27524ADR is Texas Instruments. Texas Instruments is a multinational semiconductor design and manufacturing company. They are known for producing a wide range of integrated circuits and other electronic components used in various industries such as automotive, electronics, and telecommunications.
  • Application Field

    The UCC27524ADR is a high-speed, dual-channel gate driver IC. It is commonly used in applications such as motor control, power converters, and inverters.
  • Package

    The UCC27524ADR chip is available in a SOIC-8 package type. It has a T/R (tape and reel) form and its size is 4.9mm x 3.9mm.

Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente

  • Produit

    Nous avons des produits riches, pouvons répondre à vos différents besoins.

  • quantity

    La quantité minimum de commande commence à partir de 1 pièce.

  • shipping

    Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $

  • garantie

    Garantie de qualité de 365 jours pour tous les produits

Notes et avis

Notes
Veuillez évaluer le produit !
Merci de saisir un commentaire

Veuillez soumettre vos commentaires après vous être connecté à votre compte.

Soumettre

Recommander

  • TPS61201DRCR

    TPS61201DRCR

    Texas Instruments

    3A Switches for Efficient Power Conversion

  • BQ24172RGYR

    BQ24172RGYR

    Texas Instruments

    Fast charger for 1-3 cell batteries

  • LM1117MPX-ADJ/NOPB

    LM1117MPX-ADJ/NOPB

    TI

    Linear Voltage Regulator IC Positive Adjustable 1 ...

  • LM5112SD

    LM5112SD

    TI

    Low-Side Gate Driver IC Inverting, Non-Inverting 6...

  • UCC28700DBVR

    UCC28700DBVR

    TI

    Converter Offline Flyback Topology 1kHz ~ 130kHz S...

  • LM78L05ACMX/NOPB

    LM78L05ACMX/NOPB

    Texas Instruments

    With its compact SOIC-8 package and RoHS complianc...